Extang Xceed Tonneau Cover Review – April 2023

Do I need to invest in the tonneau cover? Definitely, yes. Investing money in the best tonneau cover is the right decision. It is pretty helpful and valuable. But finding the right and best tonneau cover is hard. I recently installed an Extang Xceed tonneau cover, which worked amazingly. So, I decided to pen down an article and share my review on Extang Xceed Tonneau Cover.

You have to consider various things before buying a tonneau cover, like which type and material give the best protection and security to the cargo. There was a fuss about Xceed’s hard folding cover among truck owners. I purchased one and installed it over my truck bed to know whether it was wonderful or just hype. 

To save you precious time looking through different reviews, I have written this complete review on Exceed Xceed Tonneau cover for you that covers all areas. Moreover, there will be a difference between Extang Xceed and BAKFlip MX4. So, keep scrolling to find out.

Extang Xceed Tonneau Cover Review

I will explain every bit of this tonneau cover along with its pros and cons, so you have enough knowledge about it. This review will help you to purchase this tonneau cover.

Version: 

The Xceed has been made for one truck and is more than one style.

Dodge Ram 

The Xceed hard folding tonneau cover New Body Style fits over the Dodge Ram 2019-2022 with a 5’.7″ and 6’.4″ truck bed. However, it does not fit with the multifunctional tailgate.

Extang Xceed Features and Specifications

As I mentioned earlier, there are many things you must have to consider before buying a tonneau cover. To get better knowledge about the Extang Xceed tonneau cover, you must read the following paragraphs that help you to decide whether to buy a tonneau cover or not and which one is right for you.

Here is the quick rundown for the Xceed features and Specifications.

  • Brand: Extang Xceed
  • Style: Hard folding
  • Material:  Aluminum
  • Exterior: matte black
  • Lock type: tailgate
  • Bed access: 100%
  • Warranty: 5 years
  • Item weight: 75.1 pounds
  • Product dimensions: ‎84 x 30 x 10 inches

Material 

The Extang Xceed tonneau cover is made out of aluminum material. This heavy-duty aluminum gives ultimate protection to my valuables. The top of the cover is hard and adds an excellent vinyl section which allows the cover to leave all of the seams out. 

It guards the cargo against harmful outside elements. Furthermore, this cover helps prevent water from building up in your bed. The Xceed tonneau cover allows the capacity of loading 500 lbs of weight when evenly distributed. 

What about the frame material? 

The cover frame features aluminum panels crafted with industrial-grade vinyl, making the cover more durable. This flush-mounted tonneau cover allows a low-profile design that gives my truck a sleek and pleasant look. Since the material is lightweight, the cover installation was uncomplicated for me.

One thing I like about this cover is that the Xceed tonneau cover has an integrated corner tuck system. The highly improved tarp tension satisfied me while driving because the sides were tightly secured and did not cause flaps or noise. Moreover, the cargo remained safe and sound even if I drove my truck from 0 to 80 in just a few seconds on an open road. 

Design 

The Extang Xceed hard folding tonneau cover features a very low-profile design. And it takes the look of the truck to the next level. The low profile design combines with a smooth black color, making the tonneau cover look classy. 

The water strips do not add much height to the cover and keep the cover almost level with the truck bed. It has an excellent fit. 

The cover overhangs a little bit on the tailgate and has no gap, which I think is excellent. Because this way, it holds most of the water and prevents it from getting inside the truck bed. 

As for the type, Extang Xceed is a hard tri-folding tonneau cover. How much does it protect the cargo?

So, Extang Xceed works similarly to the soft vinyl ones but adds more protection and security to the cargo inside the truck bed. When folded up near the windscreen, the cover gives complete bed access to its owner. You can secure the cover by using two notable features.

One is the hook and loop straps. It is located at the front of the cover. So when you fold up the cover, you can fasten it by hook and loop straps. It gives ⅔ bed access. 

The next is prop rods. When you need to use the complete bed to add significant and heavy objects or all-terrain vehicles, fold the cover forward and secure it using prop rods. By doing this, you can have complete bed access. With these prop rods, you get a 90-degree angle on your tonneau cover.

If you want to remove these prop rods, you always have the option of leaning them towards your cab. The cover includes bumpers, so you do not have to worry about damaging the windscreen. It protects your tailgate as well. 

Locking Mechanism 

Extang Xceed introduces the newest feature for opening and closing the lock. It is paired with an industry-first Secure, handy Rotary Knob Latching System, which improves the operation cable for tamper-proof security. The knob is located on the driver’s side. 

How to open the cover? The opening is effortless turn the little knob, and it opens the first section of the tonneau cover. It is more secure than other covers in this category. 

Unboxing & Application Pictures:

How to Install Extang Xceed Tonneau Cover?

As the other Extang Tonneau covers, you can install the Xceed tri-fold tonneau cover in 30 minutes. No drilling is required on the majority of the trucks. It requires necessary tonneau cover accessories to install it properly, and this cover comes pre-assembled with all the needed accessories. In addition, the instruction manual also comes with the product.

How did I install the Xceed tonneau cover?

I cleaned the surface of the bulkhead with an alcohol pad so it may remove all the dirt. And then applied the weatherstrips along the leading edge of the bulkhead. This step can skip on trucks with already existing bed liners.

Then, I placed rails on the side of the truck. I snug it up to the bulkhead with the slotted metal brackets toward the front with the front rail. The rails sat utterly flush with my truck. If you have a bed liner, you may need to trim or cut it from the corner of the bulkhead if the rail is hanging over. 

Clamp down the rails to make them fit perfectly. I grabbed the clamp and placed it at the rails’ center, front, and end. I made sure to insert the clamp up. After this, I placed the cover and attached other hardware accessories. The end clamps are responsible for keeping the cover secure in its place.

To make sure it was correctly installed or not, I folded the cover and fastened it to my truck. You can also check by doing this. The cover is just easy to remove as it is handy to install. 

Performance 

If you have stuck around this far, you can quickly tell how the Extang Xceed tonneau cover performs. This heavy-duty aluminum cover can stand in any weather condition without wear and tear. In addition, the cover has weather strips that ensure high weather protection and keep the cargo dry. 

The tri-fold hard cover keeps the cargo protected while giving a low-profile design.

Pros

  • Provides excellent strength, a stylish look, and ultimate security for your truck. 
  • Keeps water and dust out of the truck bed.
  • The powder-coated hinges give extra wear resistance and protection. 
  • It can easily open by just twisting the knob.
  • It is budget-friendly.

Cons

  • Due to the vinyl tarp, the cover causes delamination.
  • The matte black color fades away. 

Extang Xceed vs Bakflip mx4

Extang and Bakflip tonneau covers are made in the USA and come in the Best tonneau covers brands. Both covers are designed to protect your truck bed from the outer natural components and the eyes of thieves. 

Here is the difference between Xceed and MX4 tonneau covers to choose which is right for you. 

Extang Xceed tonneau cover is backed by 5 years of warranty. It fits over only 2 different sizes, 5’7″ and 6’4″ truck beds, and the finish is matte black and provides the ultimate low-profile look. On top of it, it has an industry-first Rotary Latching system that quickly opens the cover by just turning the knob. 

If I talk about the weight of this product, the Xceed weighs 75.1 pounds. It can hold 500 lbs of evenly distributed weight. It has drain tubes that conduct the water and snow away from the truck bed. 

The heavy-duty Enduracoat vinyl layer creates a seamless appearance and improves water resistance at the hinges. It does not work with the multifunction tailgate.

Conversely, Bakflip MX4 also provides 5 years of warranty. It is compatible with three sizes of 5’10”, 6’7″, and 8’2″ truck beds. The cover comes in a premium black finish and allows a low-profile design. It has string latches to open the cover. 

The cover weight is around 71 pounds. It holds up to 400 pounds of weight when evenly distributed. It has drain tubes that conduct the water out and keep the cargo dry. MX4 is the best Bakflip Tonneau cover. It does work with a multi-pro / flex tailgate. 

All in all, the Xceed tonneau cover is not heavy on pockets and can easily be installed. It is an excellent option for those who want extra protection with no hassle. Besides, Bakflip MX4 is challenging to install. It is a good choice for those looking for a hard-hinged tonneau cover. 

Who makes the strongest tonneau cover?

First, it was Diamondback Covers that claimed to make the most substantial tonneau cover. But now Renegade Covers have come with improved quality of these covers. These covers can stand a weight of 400 pounds in contrast to Diamondback Covers. 

Now, Renegade is the only brand that can hold 2,000 pounds. If you put heavy and oversized objects over the tonneau cover, then Renegade is perfect for your needs. 

Is the Extang solid fold 2.0 waterproof?

Extang Solid Fold 2.0 is the upgraded version of its hard Fold 1.0. It sits on top of the truck bed rails and uses the truck’s OEM rails for support. The upper surface is made of Endurashield panels that are tough enough to resist UV rays, scratch, and dent. 

So the most asked question is Extang solid fold 2.0 waterproof? The answer is NO., but you can make it by placing weatherstrips and a few other things to make it pretty close.

You can also read: Are tonneau covers waterproof?

Final Words | Best Hard tri-folding Tonneau cover

Even though it is a hard folding cover, you can still fold it like a traditional soft vinyl tonneau cover. This tonneau cover will give you all the benefits of the soft vinyl tonneau cover, along with the ultimate protection of the hardtop.

It is an excellent example of a tonneau cover that does it all. Strength, durability, easy locking system, I mean, it does everything. I have mentioned Extang Xceed’s features, pros, and cons in detail in this article. I would suggest this tonneau cover to everyone who does not have any clue which one to buy. 

Leave a Comment