Can 2K Primer Be Used On Bare Metal? Things You Need to Know

Does a 2K primer have enough strong capability to stick on bare metal? A 2K primer is a highly durable acrylic urethane primer that bonds with the metal over the recommended substrate. It has terrific rust-suppressing properties. As an expert, many people ask me if using 2K primer on bare metal is safe. In this regard, I have intended to make a guide on Can 2K Primer Be Used On Bare Metal and how long it will go on bare metal. 

A 2K primer is also called a hole filler primer. You can apply some 2K primer into the holes and equal it by sanding. As you can observe, a 2K primer has several advantages, but one of the things people are unsure or uncertain about is they confidently use it on bare metal, which results in cracking and peeling. If you are in the same boat as them, read this useful guide that helps you in it. 

Can 2K urethane primer be used on bare metal?

What primer should I use on bare metal? It might make you wonder that 2K primer can not be used on bare metal. The reason is simple and straightforward. A 2K primer has less adhesion power to the bare metal resulting in cracking and peeling. 

If you are a user of 2K primer, then you would know that primers do not firmly bond with bare metal. It starts to crack prematurely and flake off. Additionally, it has poor adhesion and can not stay long on bare metal. However, if you intend to use it on some project, remember it is a gamble to use it and just durable for some time, not go for years.

Which primer is used as an alternative to bare metal?

As 2K primer is not good to stick on bare metal, Epoxy one can be used directly on bare metal and can last long. 

Many primer brands advise not to use it on bare metal. However, being a DIY lover, you must have intended to use it on bare metal, and the results indeed made you upset. A 2K primer has a less or poor bond of stickiness on bare metal that leads to cracking. 

Pro Tip: If you want to prime the bare area, and make 2K primer firmly adhesive on bare metal, ensure you use epoxy before it. 

Compared to epoxy, there is another primer named self-etch. It can also be used before applying primer directly on bare metal. It helps primer stick firmly on the bare metal and be durable. 

Here is a tidbit for you to read: How Much Does A Raptor Liner Paint Job Cost?

Applying a 2K primer is not recommended at all. Cracking and peeling off are not the only reasons to avoid this. As I mentioned earlier, a primer has poor adhesion, which means it can not stick on bare metal, which leads to rust and corroding. Therefore, I recommend using any substrate before applying primer on bare metal.

Get to know about: Can You Spray Raptor Liner Over Chrome?

Does 2K Primer Stick To Bare Metal Without Epoxy?

Using a 2K primer after applying epoxy is recommended. However, if you are in a hurry and have no time to apply epoxy, you can skip this part. But the question is will it stick on bare metal, and how long does it go without wearing out?

Yes, you can use 2K primer directly over bare metal without epoxy. But it has weak and poor adhesion. To make it strong, use several coats of paint over it. 

Note: Applying 2K primer without epoxy will not last long and be as durable as it would be epoxy. 

I insist on using epoxy before applying primer because it helps to stick firmly on bare metal. Moreover, it prevents bare metal from rusting and corroding. 

If you live in a rainy area where rusting is expected, I recommend applying the epoxy before 2K primer to avoid rust. 

Do you need primer when painting bare metal?

As an expert, I noticed people usually did not apply any primer and then complained about the paint not adhesive well on bare metal and started flaking off. To avoid this cracking and flaking off, I suggest you remember to apply primer on the bare metal. It smoothes out the surface of the bare metal and makes it ready for paint. Moreover, using a primer before applying paint will give you desired results. 

Best primer for Bare Metal

If you intend to use 2K primer on bare metal, it recommends using any substrate before primer for good adhesion. It will protect your metal from rust and future damage and harm. 

Therefore, there are various options for substrates that you can opt for applying before 2K primer. 

  • OEM primer
  • Fiberglass
  • Epoxy primer
  • Self-etching primer
  • Polyester putty

How do you prime bare metal?

In order to prime the bare metal surface for paint, there are the following steps you must take into account before painting.

  1. To begin with, use an alcohol pad to remove any dirt, debris, and grease.
  2. Moving forward to this, use sand grit paper to de-gloss and rough the surface. Paint sticks well on rough and matte surfaces.
  3. Next, wipe the surface of bare metal to clean the sand dust.
  4. Apply primer on bare metal to make the metal surface even and poreless. Additionally, primer helps to reduce the chance of rust and corroding.
  5. Lastly, apply paint on the bare metal surface. 

By following this method, your paint will last for years. 

You can also read about: Can You Spray Bedliner On Aluminum Diamond Plate?

Summing Up: Can I paint metal with just primer?

You must know the correct answer if you keenly read this article from the top. There is no wrong with using 2K primer on bare metal. However, there are some tips and instructions you have to follow before using it. These tricks help to make your primer firmly adhesive on bare metal. It quickly comes off the surface if you do not use any substrate before applying the 2K primer. As a result, The bare metal surface becomes rusty, which leads to further damage. 

I have mentioned many alternative substrates you can find in nearby stores. In addition, I explained the method of using primer on bare metal. I believe this guide will be helpful for you in your upcoming project. 

Leave a Comment